A competitively priced non-interpretive ECG recorder that has all the capabilities you need to make accurate determinations

The Cardipia ECG recorder 203NV unit can be powered from the mains or from the built-in rechargeable battery with an LCD display for operational messages and alarms and parameters that can be easily changed from the straightforward control panel.

Features:

• Thermal print array
• 1 or 3 channel format printout
• Selectable chart length
• Paper width 63mm
• 25mm or 50mm per sec. trace speed
• 3 filters
• Leads I,II,III, aVR, aVL & aVF
• Manual or automatic recording modes
• Optional built in rechargeable battery for portability
• Paper Sensor: When paper is used up, recording stops automatically and the alarm message is displayed
• Electrode Sensor: When electrodes are off, the alarm message is displayed and a flat line is printed

Specifications

• Recording Channel: 3, 1 channel
• Recording System: High resolution thermal printer with 8 dots/mm
• Recording Format: Automatic 6 lead recording as a group I (I,II,III), aVR(aVR,aVL,aVF) and manual 1 channel recording
• Recording sensitivity: 5, 10, 20mm/ mV +/-5%
• Recording Speed: 25 or 50mm per second
• Recording Paper: 63mm x 30 metre roll
• Display: LCD 16 character x 2 lines
• ADC Sampling: 10 bit
• ADC sampling Rate: 500Hz
• CMRR > 100dB
• Input Impedance: > 40 ohms
• Frequency Response: To reduce baseline drift, EMG & AC interference Filtered: 0.5 ~ 30Hz (-3dB) Unfiltered: 0.05 ~ 150Hz (-3dB)
• Calibration Test: Frequency response test using 1mV
• Recording Leads: 6 standard leads (I,II,III,aVR,aVL, aVF)
• Auto power off: 5 minutes from last standby operation
• Defibrillator Protection: 5000v, EN/IEC 60601-2-25
• Power requirements: 100~240v 50/60Hz , built in 24v NiCd battery
• Size: 25cm x 31cm x 9cm
• Weight: 2.6Kg