A rugged, easy-to-use monitor for prep-room or theatre

Combining end-tidal CO2 measurement with pulse oximetry and temperature, the Vetronic Impact-III delivers performance and reliability in a robust, portable unit.

Three units in one, with optional configuration

Impact-III is an acronym, standing for “Instant Monitoring of Pulse-Oximetry And Capnography and Temperature”. As such, Impact-III delivers all that its name suggests: numerical and trace information is shown for all parameters, including capnography, within 15 seconds of turning the unit on.

The interface to Impact-III has been made simple and easy to use, so in most cases all that is required is to switch the unit on and start monitoring. In addition, any changes made to settings will automatically be saved in memory and retained between uses.

There are simple-to-use alarms featured for all three monitoring units. These all follow the same pattern for set up, making the system intuitive to use. All alarm conditions are clearly reported on the main screen, with an option to silence (60 seconds) or cancel. Impact-III also integrates fully with our VitalMonitor software suite, the optional wireless module allows full patient monitoring and data recording on a remote computer.

Key features:

• Clear, high-visibility screen for easy viewing
• Battery or mains powered for portability
• Optional configuration:
• Capnograph
• Pulse-oximeter
• Temperature
• or all three!
• Micro-stream sampling suitable for all animals over 100g
• Self-calibrating capnograph
• Reliable SpO2 and pulse-rate measurement
• Temperature monitor supports our Mini-Temp range of 1.2mm sensors
• Delta temperature measurements
• Integrates with Vetronic VitalMonitor software suite for data recording

The Impact-III comes supplied with everything you need to use the unit out of the box, including (depending on modules requested):

• EN-AC-FG-C203 Aluminium Equipment Flight Case
• ESA 24-09-01 Vetronic Medical Devices Mains Charger 9v
• Operating Manual
• Impact-III “Quick Guide”
• CD with files
• VS0057 Gas Analyser Sampling Kit
• VS0058 Gas Analyser Waste Kit

General Specifications:

Screen size:	60mm x 38mm viewing area
Screen type:	128 x 64 pixels. Backlit white on blue high-contrast LCD
Electrical supply:	Internal rechargeable NimH batteries, with mains charger
Electrical classification:	Impact-III is a Class II electrical device
Power:	15W maximum
Battery life:	6 hours continuous use with all three modules fitted
Battery recharge time:	5 hours from full discharge

Sidestream Capnograph

CO2 detection range:	0-15% (0-1140mmHg)
Accuracy:	+/- 2%
Respiratory rate range:	0-150 breaths/min
Sampling rate:	50mL/min fixed rate
Alarms:	High ET, Low ET, High FiCO2, Apnoea time

Pulse-oximeter

Sensor type:	Dual beam (Red/IR) transmission or reflectance
Range:	18 to 450 pulses per minute, 0 to 100% saturation
SpO2 accuracy:	70 to 100% +/- 2%
Pulse rate accuracy:	+/- 3%
Alarms:	Low Saturation, High HR, Low HR

Temperature

Capability:	1 or 2 sensors
Measurement range:	5°C to 55°C (41°F to 131°F)
Accuracy:	+/- 2%
Sensors:	Either YSI 400 series-compatible or MiniTemp-compatible *
Alarms:	High T1/T2, Low T1/T2, Max Delta

	* Impact-III can be fitted with a temperature module to support either probe, but not both.

More Information

More Information
Price	£1,795.00
Animal	Mixed
SKU	VSL-IMPACT-BUNDLE
Brand	Vetronic Services Ltd
Catagory Sub Heading	Configure Your Modules
Monitor Parameters	C0², Oxygen, Respiration , Sp0², Temperature
Power Source	Battery, Mains
Optional Modules	Yes - At time of order only

Aftercare

Protect your New Purchase
With A Care Plan From Burtons

Here for the life of your equipment, Burtons proudly offers a complete aftercare solution for much of our equipment range Including Maintenance plans, Waste gas monitoring, Equipment Repair and Calibration.

Why is an Equipment Care Plan
The Right Thing for your Vital Equipment?

Planned preventative maintenance is your best defence against sudden failure of vital, frequently used equipment. Much of the equipment we see in practice today has been recycled and is of an age where failure of components is highly likely unless routine maintenance is carried out.

By regularly having your equipment serviced you are extending the life of your equipment and ensuring it is working to its full ability

View all our aftercare options

Or call our team on 01622 834350 for more information

Reviews

Write Your Own Review

You're reviewing: Vetronic Impact III Monitor

Quality

1 star 2 stars 3 stars 4 stars 5 stars

Nickname *

Summary *

Review *

SKU

VSL-IMPACT-BUNDLE

Category

Monitors, Procedures & Care, Patient Monitoring

Good To Know...

At Burtons we know you have a choice to shop with us, that is why we always aim to delight our customers with a fast, easy, shopping experience. Making and sourcing only the best products we can find to fit your needs.

Price Matching: We regularly check all our prices against competitors so you don't have to. If you do find a like for like product cheaper we will aim to not just match it, but beat it!

Backorders: All back ordered items will be ordered and shipped as quickly as we can to you. Special order items may take up to 4 weeks. Once ordered a member of our team will be in contact to keep you informed of estimated delivery dates.

Returns Policy: You may return new, unworn or unused products within fourteen (14) days of delivery for a full refund of the cost of the goods, or an exchange if preferred. This is on top of your statutory rights.